Power System Analysis Lecture Notes Ppt Online

Fault clears at angle ( \delta_c ). System stable if area ( A_1 ) (accelerating) = area ( A_2 ) (decelerating).

Slide 1: Title – Load Flow Analysis Slide 2: Bus types (Slack, PV, PQ) Slide 3: Y-bus formation example (3-bus system) Slide 4: Newton-Raphson algorithm flowchart Slide 5: Convergence criteria (|ΔP|,|ΔQ| < 0.001) Slide 6: Class exercise – 4-bus system Slide 7: Solution & interpretation (voltage profile) power system analysis lecture notes ppt

| Concept | Formula | |---------|---------| | Base impedance | ( Z_base = V_base^2 / S_base ) | | Y-bus element | ( Y_ik = -y_ik ) (off-diag) | | Newton-Raphson | ( \beginbmatrix \Delta P \ \Delta Q \endbmatrix = J \beginbmatrix \Delta \delta \ \Delta |V| \endbmatrix ) | | Sym. fault current | ( I_f = V_th / (Z_th+Z_f) ) | | SLG fault | ( I_f = 3V_f / (Z_1+Z_2+Z_0) ) | | Swing equation | ( (2H/\omega_s) d^2\delta/dt^2 = P_m - P_e ) | Fault clears at angle ( \delta_c )

| Fault type | Connection at fault point | |------------|---------------------------| | Single line-to-ground (SLG) | Z1, Z2, Z0 in series | | Line-to-line (L-L) | Z1, Z2 in parallel | | Double line-to-ground (DLG) | Z1 in series with (Z2∥Z0) | fault current | ( I_f = V_th /

| Line type | R (Ω/km) | L (mH/km) | C (nF/km) | |-----------|----------|-----------|-----------| | Short (<80 km) | lumped | ignored | ignored | | Medium (80–240 km) | lumped | lumped | lumped (π model) | | Long (>240 km) | distributed parameters | | | 4. Load Flow Analysis (PPT Module 4) Goal: Determine voltage magnitude & angle at each bus for given loads/generations.

Generator: 10 MVA, 11 kV, ( X_d'' = 0.12 ) pu. Transformer 10 MVA, 11/132 kV, ( X_t = 0.08 ) pu. Line impedance 20 Ω (on 132 kV). Fault at 132 kV bus. Find ( I_f ) in kA.