Here is a more detailed, step-by-step installation process: Connect to the switch using a console cable or through a network connection. Step 2: Enter the Boot Loader Power on the switch and enter the boot loader by pressing the Ctrl + Break keys during bootup. Step 3: Set IP Address and Network Settings In the boot loader, set the IP address and other network settings as needed using the following commands:
set ip address <ip_address> <subnet_mask> set gateway <gateway_ip_address> Use the copy command to copy the n3000-uk9-kickstart.6.0.2.u6.10.bin file from a TFTP server or other supported server to the switch: n3000-uk9-kickstart.6.0.2.u6.10.bin download
boot bootflash:n3000-uk9-kickstart.6.0.2.u6.10.bin Here is a more detailed, step-by-step installation process:
In this article,