Catch up on Season 1
Before the flames of war reignite, take a journey back to where it all began. As the Greens and the Blacks prepare for battle, refresh your memory of the alliances and betrayals that shaped the story so far.
Code Copy Code Copied Offset| Hex Data ———|———- 0x1000 | 53 31 32 33 34 35 36 37 38 39 In this example, the serial number S123456789 is located at offset 0x1000 . We can update the serial number by replacing the old serial number with the new one:
Code Copy Code Copied Offset | Hex Data ———|———- 0x1000 | 53 39 38 37 36 35 34 33 32 31 We can then save the updated BIOS bin file and flash it to the computer how to change serial number in bios bin file
Here are the step-by-step instructions for changing the serial number in a BIOS bin file: Open the BIOS bin file in a hex editor. The file will be displayed in a hexadecimal format, with each byte represented by two hexadecimal digits. Step 2: Locate the Serial Number Locate the serial number in the BIOS bin file. The serial number is usually stored in a specific location in the file, such as in the DMI (Desktop Management Interface) section. You can search for the serial number by pressing Ctrl+F and entering the current serial number. Step 3: Identify the Serial Number Offset Once you have located the serial number, identify the offset of the serial number in the file. The offset is the position of the serial number in the file, measured in bytes. Step 4: Create a New Serial Number Create a new serial number that you want to use. Make sure that the new serial number is in the correct format and is a valid serial number for your computer. Step 5: Update the Serial Number in the BIOS Bin File Update the serial number in the BIOS bin file by replacing the old serial number with the new one. You can do this by selecting the old serial number in the hex editor and typing in the new serial number. Step 6: Save the Updated BIOS Bin File Save the updated BIOS bin file. Make sure that you save the file in the same format as the original file. Step 7: Flash the Updated BIOS Bin File Flash the updated BIOS bin file to the computer’s BIOS. This will update the BIOS with the new serial number. Step 2: Locate the Serial Number Locate the
A BIOS bin file, also known as a BIOS image file, is a binary file that contains the firmware for a computer’s Basic Input/Output System (BIOS). The BIOS is a type of software that controls the computer’s hardware components and provides a interface for the operating system to interact with the hardware. Step 3: Identify the Serial Number Offset Once
Suppose we have a Phoenix BIOS bin file called bios.bin and we want to change the serial number from S123456789 to S987654321 . We can use the hex editor HxD to open the file and locate the serial number.
